1.Valve specifications.
– Butterfly valve size: 50A – 500A
– Butterfly valve body material: stainless steel, cast iron, steel, plastic
Valve sealing material: Rubber, Teflon, stainless steel, wcb steel
Motor material: IP67 . high-grade aluminum alloy
– Coating: High quality epoxy paint
– Voltage: 24VAC, 220VAC, 380VAC
– Temperature: 60 degrees Celsius ~ 400 degrees Celsius
– Valve pressure: PN10, PN16, PN25, PN40
Connection: Waffer flange, JIS, BS, ANSI, DIN
– Brand: GEKOVALVE

Products are manufactured on advanced and modern technological lines, the products are assembled with meticulous details, achieving high accuracy.
– Completely replace manual operations with levers and cranks as they have long been operating. Save cost and manpower to operate the valve.
– Use common current 24V, 220V, 380V. Suitable for installation in many locations.
– The valve design is neater than other valve lines. Convenient for installation in locations with limited space.
– Can be installed horizontally, vertically, overhead, buried underground depending on the requirements of the system.
The controller is manufactured to IP68 standards with high durability, good resistance to water and dust.

Valves have very low resistance to flow through the valve when in the fully open position.
– Connection to diverse pipes Wafer, Lug, Flange – JIS, ANSI, BS, DIN flange standards.
– Diverse materials of stainless steel, cast iron, plastic allow operation in many different environments.
The valve cost is lower than the price of other valves of the same size.
The valve is controlled by Geko electric set to open and close according to the desired angles well, in the fully closed position, the valve has high tightness.
– In case of power failure, manual operation can be done by hand in a simple and convenient way. Due to the support structure, the impact force does not need to be too heavy.
– Efficient, stable valve control operation, withstands high pressure.
– High torque of the power unit, good resistance to the external environment.